Delivery (AUS Wide)
  • Delivery (AUS Wide)
  • Clayton (VIC)
  • Rowville (VIC)
  • Sth Melb (VIC)
  • Macquarie Park (NSW)

Sunix 1 Port Super-Speed USB3.1 Type-C PCI Express Card 

Sunix 1 Port Super-Speed USB3.1 Type-C PCI Express Card

USB2311C

Sunix USB2311C USB3.1 Enhanced SuperSpeed Single Port PCI Express Host Card with USB-C, 1 Port
1 Year/s Warranty
85
Standard Delivery
Express Delivery
Delivery: end of life
AUS Delivery
End Of Life

VIC Pickup
Clayton
End Of Life
Rowville
End Of Life
Sth Melb
End Of Life

NSW Pickup
Macquarie Park
End Of Life

85
1 Year Warranty
Sunix USB2311C USB3.1 Enhanced SuperSpeed Single Port PCI Express Host Card with USB-C, 1 Port
Delivery: end of life
AUS Delivery
End Of Life

VIC Pickup
Clayton
End Of Life
Rowville
End Of Life
Sth Melb
End Of Life

NSW Pickup
Macquarie Park
End Of Life

Standard Delivery

Express Delivery

Product Features

Super-Speed plus USB3.1 Type-C is the next revolution in I/O interconnect standards that will deliver the bandwidth and features required by PCs, consumer electronics and portable devices. With better performance, small form factor, high power capacity feature, Super-Speed plus USB3.1 Type-C interface will be the trendy of IT technology. 

SUNIX USB2311C is a single-port Super-Speed USB3.1 PCI Express card, and it’s compliant with the PCI Express Generation 3 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.1 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB3.1 performance is 2 times faster than USB3.0 and 20 times faster than USB2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2311C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2311C supports 5VDC@3000mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.
  • PCI Express Base Specification Revision 3.0 single-lane ( x1).
  • Compliant with Universal Serial Bus 3.1 specification Gen2.
  • Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
  • Supports simultaneous operation of multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices.
  • Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
  • Expands single external USB3.1 Super-Speed plus Type-C port (DFP) on the system.
  • USB port supplies maximum +5VDC / 3000mA power output to USB device.
  • Built-in over current protection on each USB port.
  • Support device remote wakeup function from USB keyboard or mouse.
  • Hot-swapping feature allows connect/disconnect device without powering down the system.
  • Driver supports for Microsoft Windows 7, 8.x and 10 operation systems.
  • Certified by Electromagnetic Compatibility (CE, FCC, VCCI, C-Tick, BSMI) and RoHS approval.

Product Specs

Specifications

Hardware

BUS PCI Express Spec 3.0, Single-Lane (x1)
Controller PCI Express USB3.1 Host controller, Asmedia ASM1142
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1
IRQ & IO Assigned by System

USB Communication

Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
Speed Super Speed+ (10Gpbs), Super Speed (5Gpbs), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)
No. of Port 1-port
PCB Connector USB3.1 USB Type-C port (Downstream Facing Port)
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge

Power

Source +5VDC / SATA Power Connector Type
Output Capacity USB Type-C Port: +5VDC / Maximum 3.0A / each port
Note: Total power output capacity will be limited by system power supply.
Over Current Protection USB Type-C Port: +5VDC / Maximum 3.7A / each port
Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)

Driver Support

Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64) (Windows in-box driver)
Linux Linux 2.6.31 or later (Linux OS already implemented USB3.0 driver)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)

Regulatory Approvals

EMC • EUR: CE, EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3
• US: FCC Part 15 Class B
• TAIWAN: BSMI: CNS13438
• AS/NZS: C-Tick: CISPR22
• JAPAN: VCCI
Green RoHS, CRoHS, WEEE

Physical Characteristics

PCB Dimension 65.7 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Question & Answer

Please note that questions submitted in the below form should be general questions about the product features & functionality.
For questions specific to shipping & delivery, customer service, or to you and your order please utilise this form.

For any question specifically related to stock availability or ETAs please contact us via our support page.
As stock levels are constantly changing we are unable to provide accurate and lasting information via this Question and Answer section of our website.

Customer Reviews

85
Delivery: end of life
AUS Delivery
End Of Life

VIC Pickup
Clayton
End Of Life
Rowville
End Of Life
Sth Melb
End Of Life

NSW Pickup
Macquarie Park
End Of Life

Standard Delivery

Express Delivery

Loading