*Conditions apply:
Product Name | 3G Outdoor WiFi Router with Voice NTC-30WV |
MCU | Atmel AT91SAM9G45 Microcontroller, ARM9-based 400MHz Processor |
Memory | 128MB DDR SDRAM 256MB NAND Flash |
Operating System | Embedded Linux 2.6 |
Peak Data Speed | Downlink: 21Mbps (HSDPA Cat. 14) Uplink: 5.76Mbps (HSUPA Cat. 6) EDGE MS Class 12: 247Kbps |
Cellular Bands | UMTS/HSDPA/HSUPA: 850/900/2100/1900 MHz GSM/GPRS/EDGE: 850/900/1800/1900 MHz |
Wireless LAN | IEEE 802.11b/g/n 2T2R Frequency: 2.4 ~ 2.438 GHz Ralink RT3072 Chipset Peak Data Rate: Max 300 Mbps (MIMO, WPA2) |
Wireless Security | WEP 64-bit, WEP 128-bit, WPA, WPA2, WPA-PSK, WPA2-PSK, TKIP, AES, Multiple SSIDs |
Connectivity | 1x (RJ-45) Ethernet 10/100Base-TX Port with Auto MDIX 1x Mini USB 2.0 Console Port 1x DC-in Port |
Antenna Interfaces | 2x N-Type Cellular (MIMO) 2x N-Type WLAN (MIMO) |
Sim Card Reader | Lockable Tray Reader Push-Button-to-Release Mini USIM/SIM Format |
LED Indicators | Power, Network Service Type, Tx/Rx Data Traffic, Data Carrier Connection, Signal Strength |
Administration & Configuration | Web-based User Interface (HTTP) Dual System Management SMS Client (Send/Receive) Advanced SMS Diagnostics and Command Execution Firmware Upgrade via LAN or Over-The-Air (FOTA) System Monitoring Diagnostic Log Viewer System Status and Security Logs NTP Server Support SNMP v1/v2 MIB 1x Reset Button |
Remote Management | Web-based User Interface (HTTP) Telnet, SNMP v1/v2 TR-069 Client |
LAN | DHCP Server/Client/Relay Static Route UPnP |
WAN | WWAN (Cellular) PPPoE PPP (PAP/CHAP) |
Routing & Positioning | Static RIP (v1/v2) VRRP Dynamic DNS NAT DMZ MS A-GPS (for Location Based Services) |
Firewall & Security | SPI Firewall Anti-DoS |
VPN | IPSec PPTP GRE OpenVPN |
Environment | Normal Operating Temperature: -20°C ~ +65°C Extended Operating Temperature: -25°C ~ +75°C (with Performance Deviations) Environmental Rating: IP-67 (sealed against water and dust) |
Power Supply | Power over Ethernet: 48 V DC (PoE injector not supplied) DC In port: 8 ~ 28 V with external power supply |
Stanby Input Current | 110 mA @ 12V DC |
3G Active Input Current | 300 mA @ 12V DC |
Maximum Input Current | 560 mA @ 12V DC |
Dimensions & Weight | 255mm (L) x 240mm (W) x 80mm (D) 2345g (including mounting and antennas) |
Regulatory Compliance | A-Tick (Australia), CE (Europe), FCC (USA), RoHS |
Mounting Kits | 1x Wall/Pole Mount Optional 1x adjustable Pole Mount |
Package Contents | 1 x 3G Outdoor WiFi Router with Voice 2 x WiFi Antennas 2 x 3G Antennas 1 x mounting bracket 4 x mounting bracket screws 4 x wall mount screws 2 x cable glands 1 x ferrite core 2 x hose clamps for pole mounting 1 x wireless security card 1 x printed QSG 1 x 10m DC power cable (open ended) 1 x power supply |