AOpen FSP200-60SAV - $79.00
Aopen FSP200-60SAV 200w Slim Power Supply
Information
| Aopen FSP200-60SAV 200w Slim Power Supply |
|
| Model: | FSP200-60SAV |
|---|---|
| Cash Price | $79.00 |
| Availability: | 1-3 DAYS * |
| Warranty: | 1 year |
| Manufacturer: | AOpen |
| Website: | http://english.aopen.com.tw/products/power/FSP200-... |
Freight
| Area | Cost |
|---|---|
| VIC-METRO | $12.00 |
| VIC-COUNTRY | $17.00 |
| NSW | $17.00 |
| TAS | $17.00 |
| QLD | $17.00 |
| Area | Cost |
|---|---|
| SA | $17.00 |
| NT | $20.00 |
| WA | $20.00 |
| ACT | $17.00 |
* Freight may vary for multiple items or quantity in one order
Availability
1-3 DAYS *
1-3 Days: No stock. Product available in 1-3 business days after order placed, providing suppliers have stock.
Warranty
| Term: | 1 year |
|---|
Product Details
Specification
Key Features High efficiency Low noise and ripple Output over voltage protection Approved by UL,CSA leve 3,TUV,NEMKO,CB Internal 12V DC fan provided Short circuit protection on all outputs 100% burn-in under high ambient temperature (50C) 100% Hi-pot tested Vacuum-impregnated transformer MTBF: 100K hours at 25C line input fuse protection Input Characteristics Voltage: 115/230VAC Frequency: 47Hz to 63 Hz Inrush current: 50A cold, 70A warm at 132 Vrms Input Current: 4.0A maximum / 230 V, 60 Hz. 7.0A maximum / 115 V, 50 Hz MINIMUM LOAD NORMAL LOAD MAXIMUM LOAD LOAD REG. LINE REG. RIPPLE & NOISE +3.3V 0.5A 8.3A 12/16.7A } 5% } 1% 50mV P-P +5V 1.0A 5.5A 16/13A } 5% } 1% 50mV P-P +12V 2.0A 2.3A 10.0A } 5% } 1% 120mV P-P -5V 0.0A 0.1A 0.2A } 10% } 2% 120mV P-P -12V 0.0A 0.15A 0.3A } 10% } 2% 120mV P-P +5Vsb 0.0A 1.0A 2.0A } 5% } 1% 50mV P-P (1)+3.3V & +5V total output not exceed 120W (2)+3.3V & +5V & +12V total output not exceed 185W Specifications Form factor FlexATX (proprietary) Watts 200W Remote ON/OFF Control (The Power supply shall accept a logic open collector level which will disable /enable all out put voltage ;excluding +5V standby) Temperature range Operating 0~50 Storage -20~+65 Temperature coefficient 0.01%/ Transient response (output voltage recovers in less than 1 ms max.following a 25%load change ) Hold-up time At 115V/ 60 Hz 10.0 ms minimum At 230V/ 50 Hz 16.6 ms minimum Dielectric withstand Input / output 1800VAC for 1 second Input to frame ground 1800VAC for 1 second Humidity 5~95% RH Efficiency Min 65% Typical 70% (at full load) Power good signal Turn-on delay from 100ms to 500ms Over voltage protection (+5V output 6.5V;+3.3V output 4.6V;+12V output 15.5V ) Input Characteristics Inrush current 50 amps cold, 70amps warm measured at 264Vrms
